Choose your municipality
There are several municipalities connected with The Green Menu, check whether your municipality is participating or choose for the national page.
Choose you menu card
There are several different menu cards. Choose a buildingtype down below and instantly start with the sustainable options!
Saving energy easily starts with your lamps. A large part of the total electricity consumption in a fort is from lighting. By replacing incandescent lights with LED lights, you can achieve considerable savings. LED lamps are already available in many types, sizes and colours. Dimmable types are available and they do not have a start-up time like energy-saving lights.
An LED lamp consumes 80% less power and lasts 25 times longer than an incandescent lamp. At 4 hours of operation per day, LED lamps will last 15 years. Replacing a 40W incandescent lamp with a 10W LED lamp saves around 10 euros per year (at 4 hours of operation per day). LED lamps come in all sorts of shades, shapes and sizes.
An LED lamp consumes 80% less power and lasts 25 times longer than an incandescent lamp. At 4 hours of operation per day, LED lamps will last 15 years. Replacing a 40W incandescent lamp with a 10W LED lamp saves around 10 euros per year (at 4 hours of operation per day). LED lamps come in all sorts of shades, shapes and sizes.
"Bij de recente renovatie van de militaire bergloods zijn de golfplaten voorzien van een isolatielaag, wat een enorme energiebesparing oplevert. De loods dient nu als atelier en voor tentoonstellingen, maar hij wordt ook verhuurd voor speciale bijeenkomsten. Het fort zelf is geheel voorzien van duurzame LED verlichting en ecologie is een terugkerend thema in ons artistieke programma."
Zippora Elders, Artistiek directeur Kunstfort bij Vijfhuizen
We all leave the light on from time to time. It uses quite a lot of energy unnoticed. By combining motion sensors with LED lamps, you reduce the energy consumption for your lighting. The motion sensors pick up the changes in heat radiation, so the light only comes on when someone enters a room. This way, you avoid wasting energy.
We all leave the light on from time to time. It uses quite a lot of energy unnoticed. By combining motion sensors with LED lamps, you reduce the energy consumption for your lighting. The motion sensors pick up the changes in heat radiation, so the light only comes on when someone enters a room. This way, you avoid wasting energy.